Emergency battery for external LED drivers up to 180 minutes

In short

• Provides power for up to 3 hours
• Lithium battery capacity (LiFePO4), 2200mAh
• Replaceable battery
• Easy to connect to existing LED driver
• With indicator light
• DC connection
• Suitable for LED lighting up to 120lm/w
• 2 year warranty

Emergency battery

This lithium emergency battery is specially designed for external LED drivers and has a capacity of (LiFePO4) 1500mAh, 2200mAh. It is suitable for LED panels up to 80 watts. You can also use this emergency battery for other types of LED lighting with an external LED driver and a light output of max. 120lm/W.

It takes 16 hours to fully charge the battery. The indicator light glows green when charging and when the battery is full. The indicator light does not light up when the emergency battery is in use.

• Model number: YH25B-3031050Li

Power specifications

• Rated input voltage: 220-240V AC, 50-60Hz
• AC input current: 50mA max
• AC input power nominal 4.0 W max
• Power factor: >0.5
• Emergency power output 2.8 wattage DC10...50V (3-15 LEDs) constant current output.
• Output voltage DC10...50V, DC55V max(SELV)
• Battery capacity (LiFePO4) 1500mAh, 2200mAh
• Battery charging current: 0-250mA
• 1, 1.5, 2, 3 hours nominal duration

Installation

This emergency battery for LED drivers is easy to connect. Always make sure you work without power when connecting a driver.

The battery has 4 cables: a DC connector for the LED driver, a DC connector for the lighting (Panel), an AC cable for the LED driver and an AC cable for the mains (L, N, T).

1. Click the DC connectors onto the driver and the panel.
2. Connect the L and N wires to the driver.
3. Connect the L and N (T) wires directly to the mains. You can do this safely and quickly with terminal blocks/soldering clamps.
4. Finally, make a 20mm hole for the indicator light.